Skip to main content

How to fix a Mac that won't turn on

When your Mac won't load or hangs on startup it’s not the end of the world. You still have pretty good chances of fixing it, even without a technician’s help. FOR MORE INFORMATION CLICK HERE : ACTIVATE OFFICE  Before you read next, check if your Mac is plugged in. Your first guess should be your Mac has run out of battery. If it’s not the case, you are welcome to try some of the following easy tips.
1. Check your charger’s cable
Carefully examine the cable along its full length to see if the charger is intact and all connections are in place. Also, check the AC power socket is working. To isolate the source of the problem, look into the following: Go to the link for more information: Office.com/setup
  • Does your Mac make any noise? If the fans are working but you can’t hear any other sounds, this might indicate logic board failure.
  • Could it be the display? Press the Caps Lock to see if it lights on. If it glows, then your display is probably off.

2. MacBook won’t boot? Start it in a Safe mode

Safe mode limits the macOS to its most basic functions while allowing you to recover your Mac. Sometimes it’s the single most effective solution when your Mac won’t turn on, or continuously crashes. Go to the link for more information: Office.com/setup
  • Press the Power button while holding down Shift
  • Release the Shift key after login dialogue shows up

Did your Mac wake up? Congrats, you’re in the Safe mode. At this point, you at least have some freedom of actions to investigate and troubleshoot the issue. While in the Safe mode, you might try running a couple of maintenance utilities. I've been using CleanMyMac for some years now because of its Verify Startup Disk tool, which may give you a clue why your Mac is not booting up. Verify Startup Disk tool, which may give you a clue why your Mac is not booting up. Go to the link for more information: Office.com/setup

1. Launch CleanMyMac (you can get its free version here)
2. Click section "Maintenance"
3. Check "Verify startup disk"

3. Perform the special power cycle

There are cases when your Mac wouldn’t start despite being normally plugged in, even with a green power indicator glowing. You may try rebooting your MacBook in a special mode, called "special power cycle" which involves the following steps. Go to the link for more information: Office.com/setup
  1. Unplug the power cable.
  2. Hold down the Power button for about 10 seconds.
  3. Without releasing the Power button connect the power cable.
  4. Wait 10 more seconds holding it.
  5. Let go of a button and start your Mac in a normal way.


4. Fixing a Mac booting to black screen

The common issue reported on many Apple forums is Mac’s screen going black on startup. This is typically followed by recurring “Reset Password” message. The problem appears to be somehow concerned with the battery power circuit with Mac failing to light up the screen. There is a fairly simple solution to it, though, quite an odd one — involving a flashlight or a lamp. The trick works because your login screen is still there but you can’t see it.Shine the flashlight through the Apple logo on the back of your screen. Bringing this extra light should help you see the login icon and you’ll be able to put the cursor in the right spot and log in. The screen should light up normally right after that. A variant of this solution is to shine a flashlight across the screen from left to right (on the front side of the screen). Try this in a dark room for greater effect. Go to the link for more information: Office.com/setup

5. Reset System Management Controller (SMC)

System Management Controller is responsible for many ground-level functions of your Mac. Among those are battery settings, display reactions, and specifically the Power button functions. Use the following technique to reset SMC if your MacBook won’t load.If your MacBook’s battery isn’t removable: Go to the link for more information: Office.com/setup
  1. Shut down Mac and plug in the power cord.
  2. Press Shift-Control-Option, then press Power button.
  3. Hold the keys for about 10 seconds.
  4. Release the keys.
  5. Press Power as you would normally start your Mac.
If you have a Mac with removable battery:
  1. Take out the battery
  2. Press and hold Power button for about 5 seconds
  3. Re-insert the battery and press Power button again Go to the link for more information: Office.com/setup
If you’re on a desktop Mac or Mac Pro:
  1. Unplug the power cable
  2. Give it 15 seconds
  3. Plug the cable back in
  4. Wait 5 more seconds and press Power again Go to the link for more information: Office.com/setup

6. Try Recovery mode when the Mac won't load

If the issue repeats and your Mac won’t turn on again, you can try some of these:
  • Set your Mac back using Time Machine
  • Reinstall the operating system
  • Use Disk Utility to recover your drive
  • Run some dedicated Mac maintenance app. Go to the link for more information: Office.com/setup
All these options are available via Recovery mode—not to confuse with the Safe mode—and to enter it you’ll need to once again press a few spell-invoking special buttons. Needless to say, they are of no use if your MacBook won’t load in the first place.
How to enter Recovery mode:
Got to Apple menu > Restart
Wait for Mac’s startup sound
Immediately press and hold Command + R
Don’t release the keys until you see Apple logoGive your Mac a bit of time to load and you’ll be taken to Utilities. From there on, you’ll see several to recover your Mac. 

A few more reasons your Mac won’t turn on

Putting hardware-related issues aside, there would be still many explanations for your Mac's misbehavior. But to give you a perspective, here are a few more ideas to check:
  • Corrupted caches: critical system files from the boot sector are corrupted.
  • Incompatible Login Items: some apps may affect the boot process.
  • Broken hard disk permissions: conflicting user accounts. 
Luckily, all these problems can be fixed using just software solutions. To get a health check for your Mac, start with a simple maintenance tool for Mac — a program of CleanMyMac type will do. It could help you locate hidden junk files and detect various hard drive errors which prevent your Mac from booting up. Most often than not, a quick digital garbage cleanup will do the job.

Comments

Post a Comment

Popular posts from this blog

The most effective method to explain the 5 most basic technical support issues yourself

Regardless of whether you're managing your father's decade-old PC or your own custom-manufactured gaming rig, investigating PC issues is a piece of regular daily existence. Before you make that $50 bolster call, however, attempt your hand at homebrew technical support.  Click here to visit:  norton.com/setup  We addressed probably the best help reps in the business about the most widely recognized issues they fix—and how you can do it without anyone else's help. Attempt this first  I realize it sounds like an easy decision, however before you do whatever else, restart your PC. Matthew Petrie of Falcon Northwest specialized help says that the majority of his clients take care of their issues with this basic advance. "This long-standing proverb can do some incredible things," says Petrie. While you're grinding away, ensure that your working framework is completely refreshed by running Windows Update. Dismissing updates could deny you of vital bug and execu...
103 comments
Read more

For what reason Does Restarting Seem to Fix Most Computer Problems?

Hardly any things cause more eye moves than being advised to restart something, be it your PC, cell phone, TV, or whatever other innovation we're discussing.  The majority of us are accustomed to hearing it at this point. Mcafee.com/activate Most of individuals who we help out have just restarted their PC (or whatnot) before they even converse with us, and the others watch out for hit their brows with their hands, stunned that they've overlooked this innovation panacea.  Other individuals nearly appear to complain when they hear it like they've been by one way or another offended with this too-easy to be in any way supportive guidance.  Yet, prepare to be blown away. It really works! We gauge that the greater part of the specialized issues we see from our customers and perusers are fixable with a basic reboot.  Why Restarting Something Works so Well  Since the this-really works part is off the beaten path, it makes one...
4 comments
Read more

Office 365 desktop setup tool for office 2010 and office 2007

Microsoft office enables you to make optimum utilization of applications for business purpose. It is a general sense contains Word, Excel, PowerPoint, Access, OneNote, Outlook and Publisher applications. You can log in to your account to manage MS Office, buy, renew, upgrade, update, download and install directly from official site. Activate office 2016 product key Once you download the MS office, all you need to do is provide your 25-digit product key and to get registered in Office My Account, with the details as asked. How do you download MS Office Setup? Downloading MS office can be done in two ways: You can get it Offline that is, purchase Microsoft Office CD from the retailer. You can purchase the MS Office suite online Essentials to keep in mind before you Install Office 365 setup Before you begin with the process to install and activate Microsoft Office 365 setup in your laptops, you should keep few things in mind and make sure your desktop or laptop meets the sy...
3 comments
Read more